NetBSD 3.0.1 + HP Jornada 720 = Success!

Just in time for NetBSD to release security updates and fixes, I get NBSD installed on my new Jornada 720 (thanks ebay!)

NetBSD 3.0.1_STABLE (JORNADA720) #0: Wed Nov 1 01:18:11 GMT 2006
root@vmbsd.midgard.jara23.co.uk:/usr/obj/sys/arch/hpcarm/compile/JORNADA720
total memory = 32768 KB
avail memory = 28092 KB
mainbus0 (root)
cpu0 at mainbus0: SA-1110 step B-4 (SA-1 core)
cpu0: DC disabled IC disabled WB disabled EABT
cpu0: 16KB/32B 32-way Instruction cache
cpu0: 8KB/32B 32-way write-back Data cache
saip0 at mainbus0
saost0 at saip0 addr 0×90000000-0×9000001f
saost0: SA-11×0 OS Timer
sacom0 at saip0 addr 0xd000d000-0xd000d023 intr 17
sacom0: unknown SA11×0 UART
sacc0 at saip0 addr 0×40000000-0×40001fff
sacc0: SA1111 rev 2.1
sacpcic0 at sacc0
pcmcia0 at sacpcic0
pcmcia1 at sacpcic0
sed0 at saip0
sed0: Epson SED1356, console
sed0: framebuffer address: 0×48200000
hpcfb0 at sed0: 640×240 pixels, 65536 colors, 80×24 chars
wsdisplay0 at hpcfb0 kbdmux 1: console (std, vt100 emulation)
wsmux1: connecting to wsdisplay0
hpcfb: 640×240 pixels, 65536 colors, 80×24 chars
wsdisplay0: screen 1 added (std, vt100 emulation)
j720ssp0 at saip0 addr 0×80070000-0×800700ff
wskbd0 at j720ssp0: console keyboard, using wsdisplay0
wsmouse0 at j720ssp0 mux 0
ipl_bio=00020203 ipl_net=00020002 ipl_tty=00020002 ipl_vm=00020002
ipl_audio=00020002 ipl_imp=00020002 ipl_high=00020002 ipl_serial=00020002
clock: hz=100 stathz = 64
sacpcic0: card present
an0 at pcmcia0 function 0:
an0: Cisco Systems 340 Series (firmware 4.25.23)
an0: 802.11 address: 00:40:96:41:b6:07, channel: 1-13
an0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
sacpcic0: card present
wdc0 at pcmcia1 function 0:
wdc0: i/o mapped mode
atabus0 at wdc0 channel 0
wd0 at atabus0 drive 0:

wd0: drive supports 1-sector PIO transfers, LBA addressing
wd0: 976 MB, 1985 cyl, 16 head, 63 sec, 512 bytes/sect x 2000880 sectors
wd0: drive supports PIO mode 4
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
hpcfb: 640×240 pixels, 65536 colors, 80×24 chars
wsdisplay0: screen 2 added (std, vt100 emulation)
hpcfb: 640×240 pixels, 65536 colors, 80×24 chars
wsdisplay0: screen 3 added (std, vt100 emulation)
hpcfb: 640×240 pixels, 65536 colors, 80×24 chars
wsdisplay0: screen 4 added (std, vt100 emulation)

Beer me!

Leave a Reply